Make Your Qsat Work Again

Restoring your Qsat is very easy but some people are trying to make it difficult that is why i am writing this article to make it easy for everyone to reactivate theirs. First, you have to download the latest software. download (scroll down to the end of this article to download) the required software for your decoder  then install it by going to

MENU> USBUPGRADE> browse the software
and press ok leave it for the complete upgrade. make sure you wait for complete reboot before removing the USB flash drive
Then rescan for channels as the upgrade will wipe off all the channels by going through this tutorial, Reactivate the avatarcamHD which is very
important follow this link to learn how to reactivate avatarcamhd, activate it till it shows the active code and date of expire
once it shows this volar you are done, wait for it to come up.

Note q11g software can work well on both q15g and q13g, but cannot work on q11g+ and q13g+. After successful upgrade activate your account several times until you see the active code and expire date. After upgrading the q23g check to turn on the active code.
  
 Have any questions? leave a comment for me or other gurus to
answer. Thank you

q23g software
[Download]
[Download] 

q11g software
[Download]
[Download]

q11g+
[Download]
[Download] 

q13g+
[Download] 
[Download]