Rom.bin For Qsat

              Error can occur during an upgrade of qsat, and this error is mainly bricking error which may occur as a result of bad flash or electricity going off during an upgrade, and when this
happen the qsat keeps on loading without coming up, that is after the upgrade the qsat will be ON but no picture will come up on the TV screen. How to avoid this bricking error: Ensure to
use a clean and good flash or if you are using a memory card from your phone via a USB cable ensure the USB cable is firm and that no disconnection will happen during the upgrade, always wait for a complete reboot after
a successful upgrade, do everything to avoid electricity going off during upgrade even if it means using a UPS for the qsat upgrading process which i strongly advise.
You can even change from public power source if you don't thrust the public power source to a private power generator. What to do when this brick error occur: its easy to revive the qsat just rename the software you used for the upgrade to rom and copy it into a flash (ensure only the rom is what is inside the flash) if it doesn't work you can download these ones i have prepared 
Note: you have to do another upgrade after reviving the qsat with the rom you downloaded from this site, delete the rom from the flash drive before using it to upgrade again  

q23g rom
[download]

q11g q13g & q15g rom
[download]

q13g+ rom
[download]

q11g+ rom
[download]